Problem Symptoms Table
HINT:
- If the cause of the problem still cannot be determined after the corresponding inspection, proceed to the next step shown in this table.
- The system uses Multiplex Communication. Check for DTCs for the Multiplex Communication System before performing the following inspection.PROBLEM SYMPTOMS TABLE - POWER SEAT CONTROL SYSTEM
Symptom Suspected Area Power seat does not operate (manual or memorized positions). - Power source circuit
- Position control ECU & switch assy
One function of power seat does not operate (manual or memorized positions). - Power seat motor circuit
- Position control ECU & switch assy
One or all manual seat functions do not operate (memorized positions OK). Position control ECU & switch assy Memory function does not operate. - Power source circuit
- Power seat memory switch circuit
- Park/neutral position switch circuit
- Door courtesy switch circuit
- Position control ECU & switch assy
All memory functions do not operate or operate a little then stop (manual functions OK). - Power source circuit
- Position control ECU & switch assy
One memory function does not operate or operates a little then stops (manual functions OK). - Power seat motor circuit
- Position control ECU & switch assy
Lumbar support does not operate. Lumbar support control switch circuit The power seat control system does not control the storing and restoring of the power mirror position. - Multiplex communication system
- Driving position memory switch
- Outer mirror assy
- Position control ECU & switch assy