2AZ-FE (PZEV) 2.4L
TID $04: HO2S HEATER
| TLT | CID | Unit Conversion | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $02 | Multiply by 0.000076 (A) | Maximum HO2S heater current (Bank 1 sensor 2) | Malfunction threshold for HO2S heater |
| 1 | $04 | Multiply by 0.000076 (A) | Maximum HO2S heater current (Bank 1 Sensor 3) | Malfunction threshold for HO2S heater |
O2S TEST RESULT
| Test ID | Test Item | Description | Unit Conversion | Unit | Standard Value |
|---|---|---|---|---|---|
| $07 | MIN HO2S V | Minimum HO2S voltage | Multiply by 0.005 | V | Less than malfunction threshold |
| $08 | MAX HO2S V | Maximum HO2S voltage | Multiply by 0.005 | V | More than malfunction threshold |
| $91 | Time $91 | Maximum oxygen storage capacity | Multiply by 0.0156 | Gram | More than malfunction threshold |
O2S TEST RESULT
| Test ID | Test Item | Description | Unit Conversion | Unit | Standard Value |
|---|---|---|---|---|---|
| $86 | Time $86 | HO2S impedance ratio of high-frequency and low- frequency | Multiply by 0.3906 | % | More than malfunction threshold |
TID $01: CATALYST (ACTIVE A/F CONTROL METHOD)
| TLT | CID | Unit Conversion | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $01 | Multiply by 0.0078 (no dimension) | Oxygen storage capacity: Calculated by HO2S sensor 2 output | Malfunction criteria for catalyst deterioration |
TID $02: EVAP SYSTEM (LEV II VACUUM MONITOR)
| TLT | CID | Unit Conversion | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 1 | $01 | Multiply by 0.183 (mmHg) | Fuel tank pressure change during vacuum introduction | Malfunction criteria for EVAP VSV stuck closed |
| 0 | $02 | Multiply by 65.536 (msec.) | Duration that fuel tank pressure is lower than specified value before vacuum introduction | Malfunction criteria for EVAP VSV stuck open |
| 0 | $03 | Multiply by 65.536 (msec.) | Duration that fuel tank pressure is lower Than specified value during purge flow | Malfunction criteria for Canister Closed Valve (CCV) |
| 0 | $04 | Multiply by 0.0458 (mmHg) | Fuel tank pressure change monitored by vapor pressure sensor | Malfunction criteria for 0.04 inch leak |
| 0 | $05 | Multiply by 0.0458 (mmHg) | Fuel tank pressure change monitored by vapor pressure sensor | Malfunction criteria for 0.02 inch leak |
TID $0D: HYDRO-CARBON (HC) ABSORBER DETERIORATION
| TLT | CID | Unit Conversion | Description of Test Data | Description of Test Limit |
|---|---|---|---|---|
| 0 | $01 | Multiply by 0.0078 (no dimension) | HC absorber deterioration level determined by waveforms of HO2S 2 and 3 | Malfunction criteria for HC absorber deterioration |