LEMON Manuals: Even more car manuals for everyone

Tilt Steering Column: Inspection

  1. INSPECT STEERING LOCK OPERATION 

    Check that the steering lock mechanism operates properly.

    Fig 1: Inspecting Steering Lock Operation
    G02906608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. IF NECESSARY, REPLACE KEY CYLINDER 
    1. Insert the ignition key in the ACC position.
      Fig 2: Inserting Ignition Key In ACC Position
      G02906609Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Push down the stop pin with a screwdriver, and pull out the cylinder.
    3. Install a new cylinder.

      HINT:

      Make sure the key is in the ACC position.

  3. INSPECT IGNITION SWITCH (SEE  INSPECTION  ) 
  4. IF NECESSARY, REPLACE IGNITION SWITCH 
    1. Remove the 2 screws and ignition switch from the column upper bracket.
    2. Install a new ignition switch with the 2 screws.
  5. INSPECT KEY UNLOCK WARNING SWITCH 

    (See  INSPECTION  ) 

  6. IF NECESSARY, REPLACE KEY UNLOCK WARNING SWITCH 
    1. Slide the key unlock warning switch out of the column upper bracket.
    2. Slide a new key unlock warning switch in the column upper bracket.
  7. INSPECT BEARING 

    Check the bearing rotation condition and check for abnormal noise.

    If the bearing is worn or damaged, replace the column tube.

    Fig 3: Checking Bearing Rotation Condition
    G02575664Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002