LEMON Manuals: Even more car manuals for everyone

Ignition Switch & Key Unlock Warning System (Sedan): Inspection

  1. INSPECT IGNITION SWITCH CONTINUITY 
    IGNITION SWITCH CONTINUITY SPECIFICATION

    Switch position Tester connection Specified condition
    LOCK - No continuity
    ACC 1-3 Continuity
    ON 1-2-3 Continuity
    ON 5-6 Continuity
    START 1-2 Continuity
    START 4-5-6 Continuity

    If continuity is not as specified, replace the switch.

    Fig 1: Identifying Ignition Switch Position & Connectors
    G02906743Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY 
    KEY UNLOCK WARNING SWITCH CONTINUITY SPECIFICATION

    Switch position Tester connection Specified condition
    OFF (Key removed) - No continuity
    ON (Key set) 1-2 Continuity

    If continuity is not as specified, replace the switch.

    Fig 2: Inspecting Key Unlock Warning Switch
    G02906744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT KEY UNLOCK WARNING BUZZER 

    Check that the buzzer sounds when driver's door is opened and key inserted.

    If operation is not as specified, replace the combination meter. (See LOCATION )

    Fig 3: Checking Key Unlock Warning Buzzer Sound
    G02906745Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002