LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> ECHO 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Shift Interlock Systems >> Removal & Installation >> Floor Shift Assembly >> Disassembly

Floor Shift Assembly: Disassembly

  1. Remove O/D main switch terminal as follows:
    1. Remove the connector from the shift lever plate. See Fig 1.
    2. Remove the O/D main switch connector from the shift lever plate.
    3. Disengage the secondary locking device. See Fig 2.
    4. Release the locking lug of the terminals 2 and 4, and pull the terminals out from the rearward.
    Fig 1: Removing Connector From Shift Lever Plate
    G00212328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Disengaging Secondary Locking Device
    G00212329Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Remove shift lever knob sub-assembly as follows:
    1. Remove the wire harness of the O/D main switch from the shift lever plate. See Fig 3.
    2. Remove the 2 screws and shift lever knob sub-assembly. See Fig 4.
      NOTE: Pay attention not to apply unnatural load to O/D main switch wire harness.
    3. Remove the shift lever knob cover.
    4. Remove the shift lever button and spring.
    5. Remove the O/D main switch.
    Fig 3: Removing O/D Main Switch Harness
    G00212330Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 4: Disassembling Shift Lever Knob Sub-Assembly
    G00251794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. Remove position indicator housing as follows:
    1. Remove the position indicator housing from the shift lever plate. See Fig 5.
    2. Remove the cover from the position indicator housing.
    3. Remove the position indicator slide cover from the shift lever plate.
    4. Remove the position indicator plate from the position indicator housing.
    Fig 5: Disassembling Position Indicator Housing
    G00251795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. Remove shift lock unit as follows:
    1. Remove the screw and shift lock unit. See Fig 6.
    2. Remove the solenoid from the shift lever plate. See Fig 7.
    Fig 6: Removing Screw & Shift Lock Unit
    G00251796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 7: Removing Shift Lock Solenoid
    G00251797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. Remove indicator light wire. See Fig 8.
  6. Remove key interlock cable rod. See Fig 9.
  7. Remove shift lock solenoid rod. See Fig 10.
  8. Remove shift lever sub-assembly as follows:
    1. Set a 14 mm deep socket wrench. See Fig 11.
    2. Using a punch and hammer, remove the grooved pin.
    3. Remove the detent rod and spring.
    4. Using a screwdriver, remove the control shaft and shift lever sub-assembly. See Fig 12.
  9. Remove shift lock release button and spring. See Fig 13.
Fig 8: Removing Indicator Light Wire
G00251798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 9: Removing Key Interlock Cable Rod
G00251799Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 10: Removing Shift Lock Solenoid Rod
G00251800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 11: Removing Shift Lever Sub-Assembly Grooved Pin
G00251801Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 12: Removing Control Shaft & Shift Lever Sub-Assembly
G00251802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 13: Removing Shift Lock Release Button & Spring
G00251803Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002