LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> ECHO 4D Sedan, Automatic >> Repair and Diagnosis >> General Information >> Hoist/Jack >> Introduction >> How To Troubleshoot Ecu Controlled Systems >> General Information

General Information

A large number of ECU controlled systems are used in the ECHO. In general, the ECU controlled system is considered to be a very intricate system requiring a high level of technical knowledge and expert skill to troubleshoot. However, the fact is that if you proceed to inspect the circuits one by one, troubleshooting of these systems is not complex. If you have adequate understanding of the system and a basic knowledge of electricity, accurate diagnosis and necessary repair can be performed to locate and fix the problem. This service information is designed through emphasis of the above standpoint to help service technicians perform accurate and effective troubleshooting, and is compiled for the following major ECU controlled systems:

The troubleshooting procedure and how to make use of it are described on the following pages.

Troubleshooting Chart

System Page
1. Engine TESTING PROCEDURE
2. Automatic Transaxle HOW TO PROCEED WITH TROUBLESHOOTING
3. Anti-Lock Brake System SELF-DIAGNOSTIC SYSTEM
4. Supplemental Restraint System DIAGNOSTICS
5. Theft Deterrent System HOW TO PROCEED WITH TROUBLESHOOTING

FOR USING OBD II SCAN TOOL OR TOYOTA HAND-HELD TESTER