LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> ECHO 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Introduction) >> General Information

General Information

WARNING: This page is about a different car, the 2004 Toyota ECHO. However, it is still accessible from the selected car via links, so may be relevant.
  1. INDEX 

    To assist you in finding your way through these articles, the task headings are given at the top of each procedure.

  2. PRECAUTION 

    At the beginning of each procedure, a PRECAUTION General Description is given that pertains to all repair operations contained in that article. Read these precautions before starting any repair task.

  3. TROUBLESHOOTING 

    TROUBLESHOOTING tables are included for each system to help you diagnose the problem and find the cause. Be sure to read the fundamentals of how to proceed with troubleshooting in HOW TO PROCEED WITH TROUBLESHOOTING . .

  4. REPAIR PROCEDURES 

    Most repair operations begin with an overview illustration. It identifies the components and shows how the parts fit together.

    Example:

    Fig 1: Example Of Identifying Components
    G02904902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    The procedures are presented in a step-by-step format:

    • Each illustration shows what to do and where to do it.
    • The task heading briefly describes what you will be doing.
    • The detailed text tells how to perform the task and gives information such as specifications and warnings.

    Example:

    Fig 2: Example Of Repair Procedure
    G02904903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    This format provides the experienced technician with a FAST TRACK to the information needed. The upper case task headings are easy to read and the text below it provides detailed information. Important specifications and warnings are always written in bold-faced text.

  5. REFERENCES 

    References are instances where you are given a link to another area for more information. They have been kept to a minimum.

  6. SPECIFICATIONS 

    Specifications are printed in bold-faced text throughout the text where needed. They are also found in Service Specifications for quick reference.

  7. CAUTIONS, NOTICES, HINTS: 
    • CAUTIONS are in bold type text, and indicate there is a possibility of injury to you or other people.
    • NOTICES are also presented in bold-faced text, and indicate the possibility of damage to the components being repaired.
    • HINTS are separated from the detailed text but are not in bold-faced text. HINTS provide additional information to help you perform repairs.
  8. SI UNIT 

    The UNITS used in this information comply with the SI UNITS (International System of Units) standard. For your convenience, we also provide units from the metric system and the English system.

    Example: 

    Torque: 30 N.m (310 kgf.cm, 22 ft.lbf)