LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> ECHO 2D Sedan, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat >> Installation

Front Seat: Installation

INSTALL FRONT SEAT 

  1. Slide the front seat to the most front position.
    NOTE: Make sure that seat adjuster locks.
  2. Without holding the seat track handle, mount the seat to the vehicle.

    HINT:

    If holding the seat track handle, the adjusted most front positions slip off.

  3. w/ Side airbag: Connect the connector.
  4. w/ Seat belt warning light: Connect the connector.
  5. Tighten the bolts on the rear side temporarily, from the bolt on the inner side tighten them completely.

    Torque: 37 N.m (375 kgf.cm, 27 ft.lbf) 

  6. Slide the seat to the most rear position to install the bolts on the front side.

    Torque: 37 N.m (375 kgf.cm, 27 ft.lbf) 

  7. Install the seat track covers.