LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2003 >> ECHO 2D Sedan, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat >> Disassembly

Front Seat: Disassembly

  1. REMOVE HEADREST 
  2. REMOVE RECLINING RELEASE HANDLE 
  3. REMOVE SEAT CUSHION SHIELD 

    Remove the 2 screws and seat cushion shield as shown in the illustration.

    HINT:

    Remove the seat cushion shield in order A, B as shown in the illustration.

  4. REMOVE FRONT SEAT INNER BELT 

    Remove the bolt and front seat inner belt.

    Torque: 41 N.m(420 kgf.cm, 30 ft.lbf) 

  5. REMOVE SEAT CUSHION INNER SHIELD 

    Remove the clip, screw and seat cushion inner shield.

    Fig 1: Locating Seat Cushion Shield And Screws
    G02826324Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE SEATBACK ASSEMBLY 
    1. w/ Side airbag: Disconnect and disengage the connector and wire harness.
      NOTE: Be careful not to damage the connector and wire harness.
    2. Remove the hog rings.

      HINT:

      At the time of reassembly, please refer to following item. When installing hog rings, take care to prevent wrinkles as little as possible.

      Fig 2: Identifying Airbag Assembly Wire Harness
      G02826325Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 bolts and seatback assembly.

      Torque: 43 N.m (440 kgf.cm, 32ft.lbf) 

  7. REMOVE SEATBACK PAD WITH COVER 
    1. Remove the headrest supports.
    2. Remove the seatback pad with cover from the seatback frame.
      Fig 3: Removing Seatback Assembly Bolts
      G02826326Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE SEAT CUSHION PAD WITH COVER 
    1. Remove the hog rings.

      HINT:

      At the time of reassembly, please refer to following item. When installing hog rings, take care to prevent wrinkles as little as possible.

    2. Disengage the seat cushion cover hooks and remove the seat cushion cover with pad from the seat cushion frame.
      Fig 4: Locating Hog Rings
      G02826327Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE RECLINING ADJUSTER INSIDE COVERS 

    Remove the 2 screws and 2 reclining adjuster inside covers.

    Fig 5: Removing 2 Screw And Reclining Adjuster Inside Covers
    G02826328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE SEAT TRACK HANDLE