Power Steering Vane Pump: Removal
- Remove RH engine under cover .
- Remove drive belt
.
Hook SST on the hexagonal portion of the drive belt tensioner bracket, compress the drive belt tension by turning the drive belt tensioner bracket clockwise, and remove the drive belt.
- SST 09249-63010
- Disconnect suction hose
.
Loosen the clip and disconnect the suction hose.
NOTE: Take care not to spill fluid on the drive belt. - Disconnect pressure feed tube
.
Remove the union bolt and gasket, and disconnect the pressure feed tube.
- Disconnect oil pressure switch connector .
- Remove PS vane pump assembly
.
- Using SST, loosen the bolt A sufficiently so that pump assembly can be removed.
- SST 09249-63010
NOTE: Bolt A cannot be removed. - Remove the bolt B and PS vane pump assembly.
- Using SST, loosen the bolt A sufficiently so that pump assembly can be removed.