Diagnostic Tests
- Put vehicle into initialized condition by ensuring key has not been inserted into ignition lock cylinder and all doors are closed and locked. Insert and remove key from ignition lock cylinder. Within 5 seconds, insert key and turn ignition switch OFF, ON and OFF one time. Within 30 seconds of previous step, turn ignition switch OFF, ON and OFF 9 times. Buzzer will chirp for 0.13 seconds off for 0.13 seconds and chirp for 0.5 seconds and repeats until button is released. If buzzer chirps as described, go to next step. If buzzer does not chirp, go to step 3
- Depress LOCK button on remote transmitter. Buzzer should chirp for 0.13 seconds, off for 0.5 seconds and on for 0.13 seconds and off for 0.5 seconds, and repeats until button is released. Depress UNLOCK button on remote transmitter. Buzzer should chirp for 0.13 seconds, off for 0.25 seconds on 0.13 seconds and off for 0.5 seconds and repeats until button is released. Depress luggage compartment release button on remote transmitter. Buzzer should chirp for 0.5 seconds, off for 0.5 seconds and on for 0.5 seconds and repeats until button is released. If buzzer chirps as specified, remote transmitters and door control receiver are okay at this time. If buzzer does not chirp as specified, go to next step.
- If buzzer does not chirp, check remote transmitter and door control receiver. See REMOTE TRANSMITTER and DOOR CONTROL RECEIVER under COMPONENT TESTS. If buzzer makes a continuous sound while any remote transmitter button is depressed, recognition code for remote transmitter is not registered or remote transmitter is not synchronized with rolling code. Register remote transmitter. See REMOTE TRANSMITTER REGISTRATION under PROGRAMMING.