DTC 11 & DTC 12: Abs/TRAC Solenoid Relay: DTC Detecting Condition

Detection of any of the following conditions may set DTC 11:

• Solenoid relay monitor malfunction occurs.
• Battery voltage will not exceed more than 17 volts within 2.16 seconds.
• Battery voltage will not be less than 9.5 volts within 2.16 seconds, or after solenoid relay is on and voltage at ABS/TRAC ECU terminal AST (harness connector A15-10, Red wire) is not 8 volts or more.
• If solenoid relay is off during preliminary routine, and voltage at ABS/TRAC ECU terminal AST (harness connector A15 terminal No. 10 - Red wire) is 8 volts or more and continues for 2.04 seconds or more, condition may set DTC 12.