LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1999 >> RAV4 Base, 4D Utility, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Heater System) >> Testing >> Blower Speed Control Switch

Blower Speed Control Switch

WARNING: This page is about a different car, the 1998 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Unplug connector from blower speed control switch. Test for continuity between specified terminals. See FRONT BLOWER SPEED CONTROL SWITCH . See Fig 1. If continuity is not as specified, replace blower switch.

FRONT BLOWER SPEED CONTROL SWITCH

Switch Position (1) Continuity Between Terminals No.
OFF (1)
LO 5 & 6
(D) (2) 1, 5 & 6
(D) (3) 2, 5 & 6
HI 5, 6 & 8
(1) With switch in any position, continuity should exist between terminals No. 3 and 4. With switch in OFF position, continuity should not exist between any other terminals.
(2) Circle (D) closer to LO position.
(3) Circle (D) closer to HI position.
Fig 1: Front Blower Speed Control Switch Connector Terminals Id
G95I60440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002