LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1999 >> RAV4 Base, 4D Utility, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Heater System) >> Testing >> Blower Resistor

Blower Resistor

WARNING: This page is about a different car, the 1998 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: On some vehicles, it may be necessary to remove resistor before testing it.

Unplug the resistor connector. See Fig 1. See WIRING DIAGRAMS . Test for continuity between blower resistor terminals No. 1, 2, 3 and 4. If continuity does not exist between any terminals, replace resistor.

Fig 1: Identifying Blower Resistor Connector Terminals
G95B60757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002