LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1995 >> Pickup Base >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Assembly >> Installation

Clutch Assembly: Installation

  1. If installing flywheel, apply thread sealant on threads of flywheel bolts before installing. Install and alternately tighten flywheel bolts in sequence to specification. See TORQUE SPECIFICATIONS . See Figure.
  2. Install clutch disc in clutch cover. Align reference marks on clutch cover and flywheel. Install clutch disc and clutch cover on flywheel.
  3. Using a clutch aligner, center clutch disc on flywheel. Install and alternately tighten clutch cover bolts in a crisscross pattern to specification. See TORQUE SPECIFICATIONS .
  4. Apply molybdenum disulfide grease to clutch release fork-to-pivot stud contact surfaces, hub on clutch release bearing and clutch disc splines. Install clutch release fork and clutch release bearing on transmission (if removed).
  5. On 4WD models, Install NEW gasket between transfer case and transmission. Install NEW transfer case and drive shaft upper dust cover gasket. On all models, to install remaining components, reverse removal procedure. Tighten bolt/nuts to specification. See TORQUE SPECIFICATIONS .
  6. Apply light coat of grease on lever-to-case contact surfaces on transmission or transfer case shift lever before installing. Ensure reference marks on drive shaft flanges are aligned. Fill transmission or transfer case with 75W-90 gear oil with API GL-3, GL-4 or GL-5 rating.
Fig 1: Removing Transmission Shift Lever
G97I08712Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Removing Transmission Assembly
G97G08711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002