LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1994 >> Tercel Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Heated Glass/Defoggers >> Defogger - Rear Window >> Component Testing >> Grid Filament Testing

Grid Filament Testing

NOTE: When testing grid wires with voltmeter, wrap aluminum foil around end of test probe, then press foil to grid wire. This will prevent probe from damaging grid wire.
  1. To locate breaks in grid wire filaments, attach a voltmeter to middle portion of each filament. Attach other meter probe to vertical section of window grid. See Fig 1.
  2. If a grid is broken, meter will register zero volts or about 10 volts, depending on if grid is broken between or outside test leads. If wire is unbroken, meter will register about 5 volts. To locate break, move probe along wire until voltage changes abruptly.
Fig 1: Testing Grid Filament
G91D03953Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002