LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> MR2 2.0 S >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System/Component Tests >> Relays >> Fuel Pump Relay >> Fuel Pump Relay

Fuel Pump Relay

  1. Ensure ignition is off. Remove fuel pump relay. See FUEL PUMP RELAY LOCATION  table. Using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2.
  2. Check fuel pump relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 1 and Fig 2. Replace fuel pump relay if defective.
NOTE: Fuel pump relay may also be identified using appropriate illustration in THEORY/OPERATION article or wire color. See appropriate wiring diagram in WIRING DIAGRAMS article.
FUEL PUMP RELAY LOCATION

Application Location
MR2 Turbo Driver's Side Rear Corner Of Engine Bay, Near ECM & Contains 4-Wire Connector
Fig 1: Testing Fuel Pump Relay - Checking Continuity
G93G79927Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Fuel Pump Relay - Checking Operating
G93H79928Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002