LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> MR2 2.0 S >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Circuit Testing >> Cruise Control Ecu Circuit Testing Charts

Cruise Control Ecu Circuit Testing Charts

NOTE: CC ECU circuit testing charts are provided to pinpoint a malfunctioning circuit. Checking pin voltages at CC ECU connector will help determine if CC ECU is receiving and sending proper voltage signals. Using test charts may also help in determining if there is a short or open in harness or connectors. Test circuit continuity, resistance and voltages by backprobing CC ECU harness connector.
NOTE: Unless stated otherwise in testing procedures, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance. Voltage readings may very slightly due to battery condition or charging rate.
Fig 1: CC ECU Harness Voltage Testing
G93D02760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: CC ECU Harness Voltage Testing of Toyota Motor Sales, U.S.A., Inc.
G93F83365Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: CC ECU Harness & Connector Testing
G93D02760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 4: CC ECU Harness & Connector Testing of Toyota Motor Sales, U.S.A., Inc.
G93G83366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002