LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1993 >> MR2 2.0 S >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cc Ecu Fault Code Definition >> Notes

Cc Ecu Fault Code Definition: Notes

CC ECU FAULT CODE DEFINITION

Code No. Diagnosis Problem (1) Perform Test No.
Normal Indicator Light Flashes 5 Times, CC System Can Not Be Set Or Does Not Operate 3, 5, 6, 8, 9, 7, 4, (2), (3)
11 Excessive Voltage To Motor Acceleration Side 4, (2), (3)
11 Over Current/Short In Motor Circuit 4, (2), (3)
12 Open In Magnet Clutch Circuit 4, 6, (2), (3)
12 Overcurrent/Short In Magnet Clutch Circuit 4, 6, (2), (3)
13 (4) Position Sensor Detects Abnormal Voltage 4, (2)
13 (4) Open In Actuator Motor Circuit 4, (2)
13 (4) Position Sensor Signal Value Does Not Change When Motor Operates 4, (2)
21 Speed Sensor Signal Not Sent To CC ECU For 140 Milliseconds Or Longer 5, (2)
22 Vehicle Speed Sensor Circuit In Engine Control Module Is Abnormal 5
23 (5) Vehicle Speed Decreased 10 MPH Or More Below Speed Set During Cruise Control Operation (6), 5, 4, 13
31 (4) RES/ACC Mode Is On At All Times When MAIN Switch Is On 3, (2)
32 Short In Control Switch Circuit 3, (2)
34 Control Does Not Turn Off Before Switching 3, (2)
41 Faulty CC ECU (2)
(1) Perform test numbers in order given.
(2) Replace CC ECU, and retest system.
(3) Check wire harness and connectors.
(4) With vacuum type actuator.
(5) If speed set can be maintained when speed control switch is again set to SET/COAST position, there is no malfunction.
(6) Check speed control cable and control link function.