Fuel Injectors & Fuel Rails: Removal
- Disconnect negative battery cable. Disconnect accelerator and throttle cables. Disconnect emission control hoses. Disconnect all hoses and electrical connectors from intake manifold area as required.
- Loosen 2 union nuts and remove EGR pipe. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Remove cold start injector pipe. Disconnect coolant by-pass hoses. Remove 2 intake manifold brackets. Remove 7 bolts, 2 nuts and air intake chamber. Remove intake manifold temperature sensor and bracket.
- Disconnect engine wiring harness on intake manifold. Disconnect fuel and vacuum hoses. Remove pulsation damper. Remove No. 2 fuel pipe with engine removal hook. Remove fuel pressure regulator. Remove No. 1 fuel pipe.
- Remove 3 nuts, plate washers, spacers and fuel rail with 6 injectors. Remove 6 insulators, 6 spacers and 3 collars from intake manifold. Remove injectors from fuel rail.