Hood Assembly - Remove And Install: Removal
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace)
.
- Remove the LH and RH underhood aprons. See Underhood Apron - LH (Remove and Replace)
.
- Mark the installed position of the hood hinges to the body.
- Remove the clips (x9) that attach the hood harness to the hood assembly.
Courtesy of TESLA, INC.
|
- Disconnect the LH and RH hood washer jet electrical connectors.
Courtesy of TESLA, INC.
|
- Disconnect the y-tubes from the LH and RH washer jet hoses.
Courtesy of TESLA, INC.
|
- With assistance, support the weight of the hood.
- Release the clips (x2) and disconnect the gas struts (x2) from the hood mounting bracket ball joints.
Courtesy of TESLA, INC.
|
- Remove the bolts (x4) that secure the LH and RH hood hinges to the body (torque 24 N.m).
Courtesy of TESLA, INC.
|
- With assistance, remove the hood.