Remove And Replace
WARNING: This page is about a different car, the 2024 Tesla Model S, 2023 Tesla Model S, 2022 Tesla Model S, and 2021 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
- Open RH front door
- Lower RH front window
- Move RH front seat backward
- Release phone dockNOTE: 4x clips, 2x datums, Pull up at bottom and swing out from under instrument panel
- Remove phone dockNOTE: 3x connectors, 1x clip, Take caution to release connector locks before pulling straight out of each socket to avoid damage
- Release IP service panelNOTE: 4x tabs, 2 datums
- Release diagnostic and CAN harnesses from IP service panelNOTE: 2x clips
- Remove IP service panelNOTE: 1x connector
- Remove cabin temperature sensor fanNOTE: 2x screws, T20, 2 N.m
- Install cabin temperature sensor fanNOTE: 2x screws, T20, 2 N.m
- Secure IP service panel connectorNOTE: 1x connector
- Secure diagnostic and CAN harnesses to IP service panelNOTE: 2x clips
- Install IP service panelNOTE: 4x tabs, 2 datums
- Install phone dock connectionsNOTE: 3x connectors, 1x clip
- Install phone dockNOTE: 2x datums, 4 tabs, Slide datums forward into IP and secure tabs down into center console
- Move RH front seat to original position
- Raise RH front window
- Close RH front door