LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof System >> Glass Lid >> Installation >> Glass Lid

Glass Lid

  1. Using a new TORX® screw, temporarily install the lid assembly.
  2. Perform the open/close operation checks for the lid assembly.
  3. Tighten the screw to the specified torque using TORX® T25 while adjusting the height of the lid assembly to the standard value.

    Specification: 

    Lid assembly to Roof panel (H): 0±1 mm (0±0.04 in)

    G13953528Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    4 N.m (0.4 kgf-m, 3 ft-lb)

  4. Install the cover lid.