LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Intake System (Induction)) >> Intake Duct >> Removal >> Intake Duct No. 2

Intake Duct No. 2

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL 
  2. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL
  3. Release the lock of the intake duct No. 2.
    NOTE:

    Move the both ends (a) of the spring to the cutouts (b) using a flat tip screwdriver wrapped with protection tape to release the lock. 

    G14610467Courtesy of SUBARU OF AMERICA, INC.
    G14610468Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bolt, and remove the intake duct No. 2.
    G14610469Courtesy of SUBARU OF AMERICA, INC.