Draining Of Engine Coolant
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- The engine coolant is pressurized when it is hot. Wait until engine coolant cools down before proceeding the work.
- If the engine coolant is spilt over the engine, exhaust pipe or the under cover, completely wipe it off to avoid emission of smoke or causing a fire.
- Remove the radiator cap.
- Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER> REMOVAL .
- Loosen the radiator drain plug to drain engine coolant.
- After draining the engine coolant, remove the radiator drain plug.
- Install the radiator drain plug with a new O-ring.
- Install the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
- Drain the coolant from reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK .