Rear Door Glass: Removal
- Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim. >
- Remove the sealing cover - rear door.CAUTION:
- Carefully remove the butyl tape. Excessive force will easily break the sealing cover - rear door.
- If the sealing cover - rear door gets broken, replace it with a new part.
- Be careful not to allow the butyl tape to contact any trims and seats because the butyl tape, which has a strong adhesive force, is difficult to remove once it adhered.
- Remove the screw to remove the bracket - door trim rear.
- Carefully remove the butyl tape to remove the sealing cover - rear door.
- Attach the battery ground cable and the switch - power window, and turn the ignition to ON.
- Remove the glass assembly - rear door.
- Operate the switch - power window sub rear to move the glass assembly - rear door to the position where the mounting bolts can be seen.
- Pull out the running channel - rear door.
- Remove the screws and remove the rear outer gusset cover.
- Remove the bolts and nuts, and remove the sash COMPL - lower.
- Remove the bolts, and remove the glass assembly - rear door.CAUTION: Avoid impact and damage to the glass assembly - rear door.