Fuel Pump: Removal
WARNING:
Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
- Be careful not to spill fuel.
- If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.
NOTE:
Fuel pump assembly consists of fuel pump, fuel filter and fuel level sensor.
- Release the fuel pressure. Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
- Drain fuel. Refer to DRAINING FUEL (WITH SUBARU SELECT MONITOR) , PROCEDURE, Fuel.
- Disconnect the ground cable from battery.
- Remove the rear seat cushion. Refer to REMOVAL , Rear Seat.
- Remove the service hole cover of fuel pump.
- Disconnect connectors from the fuel pump, and move aside the service hole cover.
- Disconnect the quick connector of fuel delivery tube and jet pump tube.NOTE: Disconnect the quick connector as shown in the figure.
- Remove the nuts which hold the fuel pump upper plate to the fuel tank.
- Remove the fuel pump assembly from the fuel tank.