LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Legacy F4-2.5L SOHC >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Service and Repair

Turn Signals: Service and Repair

Side Turn Signal Light Assembly

REMOVAL

1. Disconnect the ground cable from the battery.
2. Remove the scalp cap.
3. Remove the mirror.
4. Disconnect the harness connector, remove the 2 mounting screws and then remove the side turn signal light assembly.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 0.8 N.m (0.08 kgf.m, 0.59 ft.lb)