LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester F4-2.5L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Gear Sensor/Switch >> Service and Repair >> Installation

Installation

INSTALLATION

BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH

1) Install the back-up light switch & neutral position switch with the harness.

Tightening torque:
32.3 N-m (3.3 kgf-m, 23.8 ft-lb)





2) Connect the connectors of back-up light switch & neutral position switch.
3) Install the air intake chamber and intake boot.
4) Connect the battery ground cable to the battery.