With 15" Wheel
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Lift-up the vehicle, and remove the front wheels.
- Remove the caliper body and the support from housing, and suspend it from strut using a wire.
- Remove the disc rotor.NOTE: If the disc rotor seizes up within hub, drive the disc rotor out by pushing with an 8 mm bolt in holes B on the rotor.
- Clean mud and foreign particles from the caliper body assembly and the support.