LEMON Manuals: Even more car manuals for everyone

Clutch Switch (With Cruise Control)

WARNING: This page is about a different variant/trim than selected.
  1. Install so that there is a gap of 0 mm (0 in) of the clutch switch and clutch pedal stopper.

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.8 ft-lb) 

    Fig 1: Identifying Gap Between Clutch Switch And Clutch Pedal Stopper
    G05669779Courtesy of SUBARU OF AMERICA, INC.
  2. Measure the stroke of the clutch pedal.

    Clutch pedal standard full stroke: A 

    5MT non-turbo model and 6MT model 

    130 - 135 mm (5.12 - 5.31 in) 

    5MT turbo model 

    135 - 140 mm (5.31 - 5.51 in) 

    Fig 2: Identifying Clutch Pedal Standard Full Stroke
    G05669780Courtesy of SUBARU OF AMERICA, INC.
  3. If the clutch pedal stroke is out of specification, adjust the stroke. < Ref. to ADJUSTMENT  , Clutch Pedal . >
  4. Connect the clutch switch connector.