LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Impreza F4-2.5L SOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Heater Core Case >> Service and Repair

Heater Core Case: Service and Repair

Heater and Cooling Unit

REMOVAL
1. Disconnect the ground cable from the battery.
2. Using the refrigerant recovery system, discharge refrigerant.
3. Drain coolant from the radiator.
4. Remove the bolts securing expansion valve and pipe in engine compartment. Release the heater hose clamps in engine compartment to remove the hoses.






5. Remove the instrument panel.
6. Remove the blower motor unit assembly.
7. Disconnect the connectors of the actuator, thermo sensor, power transistor and blower resistor.
8. Remove the bolt and nuts and remove the heater and cooling unit.






INSTALLATION
1. Install in the reverse order of removal.
2. Charge refrigerant.

Tightening torque:
T1: 5.0 (0.5, 3.7)
T2: 6.68 (0.7, 4.9)
T3: 7.5 (0.76, 5.5)