LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Inspection

AT Shift Lock Solenoid and "P" Range Switch: Inspection

DIAGNOSTIC CHART

Step Check Yes No
1 CHECK SHIFT LOCK SOLENOID. 
Measure the resistance of shift lock solenoid connector terminals.
Terminals 
No. 4 - No. 5: 
Is the resistance between 7 - 18 Ω? Go to step 2  . Replace the shift lock solenoid and "P" range switch assembly.
2 CHECK SHIFT LOCK SOLENOID. 
Connect the battery to shift lock solenoid connector terminal, and then operate the solenoid.
Terminals 
No. 4 (+) - No. 5 (-): 
Does the shift lock solenoid operate normally? Go to step 3  . Replace the shift lock solenoid and "P" range switch assembly.
3 CHECK "P" RANGE SWITCH. 
  1. Move the select lever to "P" range.
  2. Measure the resistance between "P" range switch connector terminals.
Is the resistance less than 1 Ω? Go to step 4  . Replace the "P" range switch.
4 CHECK "P" RANGE SWITCH. 
  1. Shift the select lever to except for "P" range.
  2. Measure the resistance between "P" range switch connector terminals.
Is the resistance 1 MΩ or more? Normal operation Replace the "P" range switch.