LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch System) >> Operating Cylinder >> Disassembly

Operating Cylinder: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE: Since the operating cylinder for 6MT model cannot be disassembled, disassembly is available only for 5MT model.
  1. Remove the boot and push rod.
    NOTE: The illustration below is for a non-turbo model.
    Fig 1: Identifying Operating Cylinder (Non-Turbo Model)
    G05336426
  2. Blow compressed air through the clutch hose attachment hole.
    NOTE:
    • Face the piston port down and place a piece of wood underneath to prevent the piston from popping out.
    • The illustration below is for a non-turbo model.
    • Fig 2: Identifying Piston Port (Non-Turbo Model)
      G05336427
  3. Separate the piston and piston spring.
NOTE: The illustration below is for a non-turbo model.
Fig 3: Identifying Piston And Piston Spring (Non-Turbo Model)
G05336428