LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch System) >> Operating Cylinder >> Assembly

Operating Cylinder: Assembly

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • During assembly, apply hydraulic oil to all parts.
  • Since the operating cylinder for 6MT model cannot be disassembled, assembly is available only for 5MT model.

Recommended clutch fluid: 

New FMVSS No. 116 DOT3 or DOT4 brake fluid 

  1. Install the piston spring to the piston.
    NOTE: The illustration below is for a non-turbo model.
    Fig 1: Identifying Piston And Piston Spring (Non-Turbo Model)
    G05336428
  2. Insert the piston into the operating cylinder.
  3. Attach the push rod to the boot.
  4. Attach the boot and push rod to the operating cylinder.
NOTE: The illustration below is for a non-turbo model.
Fig 2: Identifying Operating Cylinder (Non-Turbo Model)
G05336426