Section 2 (Clutch System): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATION
| Model | 2.5 L Turbo | 2.5 L Non-turbo | |||
| Transmission type | 5MT | ||||
| Clutch cover | Type | Push type | |||
| Diaphragm set load | N (kgf, lbf) | 7850 (800, 1764) | 5688 (580, 1279) | ||
| Clutch disc | Facing material | Woven (Non-asbestos) | |||
| O.D. x I.D. x thickness mm (in) |
Pressure plate side | 230 x 155 x 3.5 (9.06 x 6.10 x 0.138) | 225 x 150 x 3.5 (8.86 x 5.9 x 0.138) | ||
| Flywheel side | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | (8.86 x 5.9 x 0.138) | |||
| Spline outer diameter | mm (in) | 25.2 (0.992), (Number of teeth: 24) | |||
| Depth of rivet head mm (in) |
Clutch cover side | 1.65 - 2.25 (0.065 - 0.089) | |||
| Flywheel side | 1.35 - 1.95 (0.053 - 0.077) | ||||
| Limit of sinking | 0.3 (0.012) | ||||
| Deflection limit | mm (in) | 0.7 (0.028) at R = 110 (4.33) | |||
| Clutch release lever ratio | 1.6 | ||||
| Release bearing | Grease-packed self-aligning | ||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) | ||
| Free play | mm (in) | 4 - 11 (0.16 - 0.43) | |||
| Release lever | Stroke | mm (in) | 11.1 - 12.5(0.437 - 0.492) | 12.1 - 13.5 (0.48 - 0.53) | |
| Flywheel | Type | Flexible | |||
GENERAL SPECIFICATION
| Model | 2.5 L Turbo STI | ||||
| Transmission type | 6MT | ||||
| Clutch cover | Type | Pull type | |||
| Diaphragm set load | N (kgf, lbf) | 9,120 (930,2,050) | |||
| Clutch disc | Facing material | Woven (Non-asbestos) | |||
| O.D. x I.D. x thickness | mm (in) | Flywheel side: 240 x 160 x 3.2 (9.45 x 6.30 x 0.126) Clutch cover side: 240 x 160 x 3.5 (9.45 x 6.30 x 0.138) | |||
| Spline outer diameter | mm (in) | 25.2 (0.992), (Number of teeth: 24) | |||
| Depth of rivet head mm (in) | Standard | Flywheel side: 1.35 - 1.95 (0.053 - 0.077) Clutch cover side: 1.65 - 2.25 (0.065 - 0.089) | |||
| Limit of sinking | 0.3 (0.012) | ||||
| Deflection limit | mm (in) | 0.7 (0.028) at R = 115 (4.53) | |||
| Clutch release lever ratio | 1.7 | ||||
| Release bearing | Grease-packed self-aligning | ||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) | ||
| Free play | mm (in) | 3 - 13 (0.12 - 0.51) | |||
| Release lever | Stroke | mm (in) | 13.3 - 14.7 (0.524 - 0.579) | ||
| Flywheel | Type | Conventional | |||