Remote Control Mirror Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Move the rearview mirror switch to each position and check continuity between terminals.
Change over switch right position:
TERMINAL SWITCH POSITION CHART
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 8 and 3, 6 and 7 | Less than 1 Ω |
| DOWN | 8 and 6, 3 and 7 | Less than 1 Ω |
| LEFT | 8 and 2, 6 and 7 | Less than 1 Ω |
| RIGHT | 8 and 6, 2 and 7 | Less than 1 Ω |
Change over switch left position:
TERMINAL SWITCH POSITION CHART
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 8 and 4, 6 and 7 | Less than 1 Ω |
| DOWN | 8 and 6, 4 and 7 | Less than 1 Ω |
| LEFT | 8 and 5, 6 and 7 | Less than 1 Ω |
| RIGHT | 8 and 6, 5 and 7 | Less than 1 Ω |
If NG, replace the switch.