LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> Impreza Outback Sport, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Brake System) >> Stop Light Switch >> Installation

Stop Light Switch: Installation

WARNING: This page is about a different car, the 2007 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stop light switch onto the bracket with screws and position it with the nut.
  2. Adjust the stop light switch position, and then tighten the nut.

    <Ref. to ADJUSTMENT , Stop Light Switch. >

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.8 ft-lb)