Front Door Glass: Removal
- Remove the front door trim. <Ref. to REMOVAL , Front Door Trim.>
- Remove the sealing cover. <Ref. to REMOVAL , Front Sealing Cover.>
- Remove the outer mirror assembly. <Ref. to REMOVAL , Outer Mirror Assembly.>
- Remove the mirror gusset.
- Remove the stabilizer (inner) and stabilizer (outer).
- Remove the screw from the rear end of the weather strip to remove the weather strip.
- Operate the power window switch to move the glass to the position shown in the figure, then remove the two nuts through the service holes.
- Remove the door glass.
CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removing glass.
- Avoid impact and damage to the glass.