LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission >> Drive Pinion Shaft Assembly >> Installation

Drive Pinion Shaft Assembly: Installation

  1. Assemble the drive pinion assembly to oil pump cover.
    NOTE: Be careful not to bend the shim.

    Tightening torque: 

    70 N.m (7.1 kgf-m, 51.6 ft-lb) 

    Fig 1: Installing Drive Pinion Assembly To Oil Pump Cover
    G03831799Courtesy of SUBARU OF AMERICA, INC.
  2. Adjust the tooth contact between drive pinion shaft assembly and front differential side gear. < Ref. to , ADJUSTMENT , Drive Pinion Shaft Assembly. >
  3. Combine the converter case with transmission case. < Ref. to , INSTALLATION , Converter Case. >
  4. Install the transmission harness connector to the stay.
  5. Install the ATF filter pipe. < Ref. to , INSTALLATION , ATF Filter. >
  6. Install the oil charge pipe with O-ring.
  7. Install the torque converter assembly. < Ref. to , INSTALLATION , Torque Converter Assembly. >
  8. Install the transmission assembly into vehicle. < Ref. to , INSTALLATION , Automatic Transmission Assembly. >