LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission >> Differential Gear Oil >> Replacement

Differential Gear Oil: Replacement

  1. Lift-up the vehicle.
  2. Remove the differential gear oil drain plug using TORX® BIT T70, and the drain the differential gear oil.
    CAUTION:
    • Directly after the vehicle has been running or the engine has been long idle running, the differential gear oil is hot. Be careful not to burn yourself.
    • Be careful not to spill the differential gear oil on exhaust pipe to prevent it from emitting smoke or fire. When the differential gear oil is spilled on exhaust pipe, wipe it away completely.
  3. Tighten the differential gear oil drain plug using TORX® BIT T70.
    NOTE: Use a new gasket.

    Tightening torque: 

    70 N.m (7.1 kgf-m, 51.6 ft-lb) 

    Fig 1: Removing Differential Gear Oil Drain Plug
    G03831628Courtesy of SUBARU OF AMERICA, INC.
  4. Lower the vehicle.
  5. Pour gear oil into the gauge hole.

    Recommended gear oil: 

    < Ref. to ,  RECOMMENDED GEAR OIL  , SPECIFICATION, General Description.> 

    Gear oil capacity: 

    1.3-1.5 Lambda (1.4-1.6 US qt, 1.1-1.3 lmp qt) 

  6. Check the level of differential gear oil.

< Ref. to , INSPECTION , Differential Gear Oil. >