LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission >> Center Differential Carrier >> Installation

Center Differential Carrier: Installation

  1. Install the center differential assembly with the shim(s).
    NOTE: Press-fit it to the bottom of bearing shoulder completely.
    Fig 1: Installing Center Differential Carrier Assembly
    G03831767Courtesy of SUBARU OF AMERICA, INC.
  2. Insert the rear drive shaft. < Ref. to , INSTALLATION , Rear Drive Shaft. >
  3. Connect the transmission case, extension case and intermediate case, and install the rear wheel speed sensor. < Ref. to , INSTALLATION , Extension Case and Intermediate Case. >
  4. Install the transmission assembly into vehicle. < Ref. to , INSTALLATION , Automatic Transmission Assembly. >