LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission (Diagnostics) >> SPORT Indicator Light Display >> Inspection

SPORT Indicator Light Display: Inspection

DIAGNOSIS: 

SPORT indicator light circuit is open or shorted.

TROUBLE SYMPTOM: 

When the ignition switch is turned to ON (engine OFF), SPORT indicator light does not illuminate.

WIRING DIAGRAM: 

Fig 1: Wiring Diagram - SPORT Indicator Light
G03831905Courtesy of SUBARU OF AMERICA, INC.
SPORT INDICATOR LIGHT DIAGNOSTIC PROCEDURE

Step Check Yes No
1 
CHECK SPORT INDICATOR LIGHT  .
Turn the ignition switch to ON.
Does the SPORT indicator light illuminate? Go to step 2  . Perform the self-diagnosis of combination meter.
2 
CHECK SPORT INDICATOR LIGHT  .
After the ignition switch is "ON", wait for at least 2 seconds.
Does the SPORT indicator light illuminate? Go to step 3  . Go to step 4  .
3 
CHECK SPORT INDICATOR LIGHT  .
Start the engine.
Does the SPORT indicator light go off? Normal. Go back to "Basic Diagnosis Procedure". < Ref. to , BASIC DIAGNOSTIC PROCEDURE . > Go to step 7  .
4 
CHECK SUBARU SELECT MONITOR COMMUNICATION  .
Connect the Subaru Select Monitor to data link connector.
Is the communication between Subaru Select Monitor and TCM normal? Go to step 5  . Check the TCM power supply ground circuit and Subaru Select Monitor communication. < Ref. to , DIAGNOSTIC PROCEDURE FOR SELECT MONITOR COMMUNICATION . >
5 
CHECK TCM 
Display the current data of TCM using Subaru Select Monitor.
Is "Diagnosis light" output signal set to "ON"? Go to step 6  . Replace the TCM. < Ref. to , TRANSMISSION CONTROL MODULE (TCM) . >
6 
CHECK BODY INTEGRATED UNIT  .
Display the current data of body integrated unit using Subaru Select Monitor. < Ref. to OPERATION , Subaru Select Monitor. >
Is "SPORT light" input signal set to "ON"? Replace the combination meter assembly. < Ref. to COMBINATION METER . > Check DTC of body integrated unit. < Ref. to , OPERATION , Subaru Select Monitor. >
7 
CHECK TCM  .
  1. Start the engine.
  2. Display the current data of TCM using Subaru Select Monitor. < Ref. to , OPERATION , Subaru Select Monitor. >
Is "Diagnosis light" output signal set to "ON"? Replace the TCM. < Ref. to , TRANSMISSION CONTROL MODULE (TCM) . > Go to step 8  .
8 
CHECK BODY INTEGRATED UNIT  .
Display the current data of body integrated unit using Subaru Select Monitor. < Ref. to , OPERATION , Subaru Select Monitor. >
Is "SPORT light" input signal set to "ON"? Check DTC of body integrated unit. Perform the diagnosis according to DTC. < Ref. to , OPERATION , Subaru Select Monitor. > Perform the self-diagnosis for combination meter. < Ref. to INSPECTION , Combination Meter System. >