LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza WRX STi >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Periodic Maintenance Service >> Timing Belt >> Inspection >> Non-Turbo Model

Non-Turbo Model

  1. Remove the front timing belt cover and timing belt cover (LH).
  2. While cranking the engine at least four rotations, check the timing belt back surface for cracks or damage. Replace the faulty timing belt as needed.
  3. Measure the timing belt width W. If it is less than 27 mm (1.06 in), check idlers, tensioner, water pump pulley and cam sprocket to determine idler alignment (squareness). Replace the worn timing belt.
    Fig 1: Measuring Timing Belt Width
    G03812466Courtesy of SUBARU OF AMERICA, INC.
  4. Install the front timing belt cover and timing belt cover (LH).