SUBARU Select Monitor (OBD Mode)
- On the < Main Menu > display screen, select the {2. Each System Check} and press the [YES] key.
- On the < System Selection Menu > display screen, select the {Engine Control System} and press the [YES] key.
- Press the [YES] key after the information of engine type is displayed.
- On the "Engine Diagnosis" display screen, select the {OBD System} and press the [YES] key.
- On the < OBD Menu > display screen, select the {4. Diagnosis Code(s) Cleared} and press the [YES] key.
- When the 'Clear Diagnostic Code?' is shown on the display screen, press the [YES] key.
- Turn the ignition switch to OFF, and then turn the Subaru Select Monitor to OFF.
NOTE:
For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.