LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) -- H4DOTC >> Throttle Body >> Removal

Throttle Body: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G03816714Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
  3. Disconnect the connector from the throttle position sensor (A) and idle air control solenoid valve (B) and manifold absolute pressure sensor (C).
    Fig 2: Locating Throttle Position Sensor, Idle Air Control Solenoid Valve And Manifold Absolute Pressure Sensor
    G03816715Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the accelerator cable.
    Fig 3: Disconnecting Accelerator Cable
    G03816716Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the engine coolant hoses from the throttle body.
    Fig 4: Disconnecting Engine Coolant Hoses From Throttle Body
    G03816717Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bolts which secure the throttle body to intake manifold.