LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) -- H4DOTC >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G03816810Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the bolt which installs the crankshaft position sensor to cylinder block.
    Fig 2: Removing Crankshaft Position Sensor To Cylinder Block Installing Bolt
    G03816811Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crankshaft position sensor, and disconnect the connector from it.
    Fig 3: Removing Crankshaft Position Sensor
    G03816812Courtesy of SUBARU OF AMERICA, INC.