LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> FUEL INJECTION (FUEL SYSTEMS) -- STi >> Intake Manifold >> Installation

Intake Manifold: Installation

  1. Install the intake manifold onto cylinder heads.
    NOTE: Always use new gaskets.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.1 ft-lb) 

    Fig 1: Installing Intake Manifold Onto Cylinder Heads
    G03817828Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the fuel delivery hose, return hose and evaporation hose.
    NOTE: If fuel hoses or clamps are damaged, replace them with new ones.
    Fig 2: Connecting Fuel Delivery Hose, Return Hose And Evaporation Hose
    G03817829Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the connector to the oil pressure switch (B), crankshaft position sensor (C) and engine coolant temperature sensor (A).
    Fig 3: Connecting Connector To Oil Pressure Switch (B), Crankshaft Position Sensor (C)
    G03817830Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the connector to the knock sensor.
    Fig 4: Connecting Connector To Knock Sensor
    G03817831Courtesy of SUBARU OF AMERICA, INC.
  5. Connect the connector to the camshaft position sensor.
    Fig 5: Connecting Connector To Camshaft Position Sensor
    G03817832Courtesy of SUBARU OF AMERICA, INC.
  6. Connect the connector to the ignition coil,
    Fig 6: Connecting Connector To Ignition Coil
    G03817833Courtesy of SUBARU OF AMERICA, INC.
  7. Connect the engine harness with clip (A) to the bracket.
    Fig 7: Connecting Engine Harness With Clip (A) To Bracket
    G03817834Courtesy of SUBARU OF AMERICA, INC.
  8. Connect the engine harness connector to the bulkhead harness connectors.
    Fig 8: Connecting Engine Harness Connector To Bulkhead Harness Connectors (1 Of 2)
    G03817835Courtesy of SUBARU OF AMERICA, INC.
    Fig 9: Connecting Engine Harness Connector To Bulkhead Harness Connectors (2 Of 2)
    G03817836Courtesy of SUBARU OF AMERICA, INC.
  9. Connect the brake booster vacuum hose.
    Fig 10: Connecting Brake Booster Vacuum Hose
    G03817837Courtesy of SUBARU OF AMERICA, INC.
  10. Connect the engine coolant hoses to the throttle body.
    Fig 11: Connecting Engine Coolant Hoses To Throttle Body
    G03817838Courtesy of SUBARU OF AMERICA, INC.
  11. Connect the emission hose (A) and connector (B) to the PCV hose assembly.
    Fig 12: Connecting Emission Hose (A) And Connector (B) To PCV Hose Assembly
    G03817839Courtesy of SUBARU OF AMERICA, INC.
  12. Connect the pressure hose to the intake duct.
    Fig 13: Connecting Pressure Hose To Intake Duct
    G03817840Courtesy of SUBARU OF AMERICA, INC.
  13. Install the power steering pump.
    1. Install the power steering tank on the bracket.
      Fig 14: Installing Power Steering Tank On Bracket
      G03817841Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the connector to the power steering pump switch.
      Fig 15: Connecting Connector To Power Steering Pump Switch
      G03817842Courtesy of SUBARU OF AMERICA, INC.
    3. Install the power steering pump, and tighten the bolts.

      Tightening torque: 

      22 N.m (2.2 kgf-m, 15.9 ft-lb) 

      Fig 16: Installing Power Steering Pump, And Tightening Bolts
      G03817843Courtesy of SUBARU OF AMERICA, INC.
    4. Install the power steering pipe brackets on the intake manifold RH.
      Fig 17: Installing Power Steering Pipe Brackets On Intake Manifold RH
      G03817844Courtesy of SUBARU OF AMERICA, INC.
    5. Install the front side V-belt. < Ref. to INSTALLATION , V-belt. >
  14. Install the coolant filler tank. < Ref. to INSTALLATION , Coolant Filler Tank. >
  15. Install the intercooler. < Ref. to INSTALLATION , Intercooler. >
  16. Install the air cleaner element.
  17. Install the air cleaner upper cover and air intake duct as a unit. < Ref. to INSTALLATION , Air Cleaner Case. >
  18. Connect the connector to the fuel pump relay.
    Fig 18: Connecting Connector To Fuel Pump Relay
    G03817845Courtesy of SUBARU OF AMERICA, INC.
  19. Connect the battery ground cable to battery.
  20. Lift up the vehicle.
  21. Install the under cover.
  22. Fill the engine coolant. < Ref. to FILLING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >