LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> FUEL INJECTION (FUEL SYSTEMS) -- STi >> Intake Manifold >> Disassembly

Intake Manifold: Disassembly

  1. Remove the fuel pipe protector RH.
    Fig 1: Removing Fuel Pipe Protector RH
    G03817846Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine ground terminal from the intake manifold.
    Fig 2: Removing Engine Ground Terminal From Intake Manifold (1 Of 2)
    G03817847Courtesy of SUBARU OF AMERICA, INC.
    Fig 3: Removing Engine Ground Terminal From Intake Manifold (2 Of 2)
    G03817848Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from the throttle position sensor (A) and manifold absolute pressure sensor (B).
    Fig 4: Disconnecting Connector From Throttle Position Sensor (A)
    G03817849Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the throttle body from the intake manifold.
    Fig 5: Removing Throttle Body From Intake Manifold
    G03817850Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from the fuel injector.
    Fig 6: Disconnecting Connector From Fuel Injector
    G03817851Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector from the tumble generator valve actuator.
    Fig 7: Disconnecting Connector From Tumble Generator Valve Actuator
    G03817852Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from the tumble generator valve sensor.
    Fig 8: Disconnecting Connector From Tumble Generator Valve Sensor
    G03817853Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the connector from the purge control solenoid valve.
  9. Remove the purge control solenoid valve.
    Fig 9: Disconnecting Connector From Purge Control Solenoid Valve
    G03817854Courtesy of SUBARU OF AMERICA, INC.
  10. Disconnect the evaporation hose and purge valve from the intake manifold.
    Fig 10: Disconnecting Evaporation Hose And Purge Valve From Intake Manifold
    G03817855Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the two bolts which hold the fuel pipes on the left side of intake manifold.
    Fig 11: Removing Two Bolts Which Hold Fuel Pipes On Left Side Of Intake Manifold
    G03817856Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the bolt which hold the fuel injector pipe onto intake manifold.
    • LH SIDE
      Fig 12: Removing Bolts Of Fuel Injector Pipe Onto Intake Manifold LH Side (1 Of 2)
      G03817857Courtesy of SUBARU OF AMERICA, INC.
      Fig 13: Removing Bolts Of Fuel Injector Pipe Onto Intake Manifold LH Side (2 Of 2)
      G03817858Courtesy of SUBARU OF AMERICA, INC.
    • RH SIDE
      Fig 14: Removing Bolts Of Fuel Injector Pipe Onto Intake Manifold RH Side (1 Of 2)
      G03817859Courtesy of SUBARU OF AMERICA, INC.
      Fig 15: Removing Bolts Of Fuel Injector Pipe Onto Intake Manifold RH Side (2 Of 2)
      G03817860Courtesy of SUBARU OF AMERICA, INC.
  13. Remove the harness bracket which holds the engine harness onto intake manifold.
    Fig 16: Removing Harness Bracket Which Holds Engine Harness Onto Intake Manifold
    G03817861Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the engine harness from the intake manifold.
  15. Loosen the clamp which holds the front left side fuel hose to injector pipe, and then remove the pipe from clamp.
    Fig 17: Loosening Clamp
    G03817862Courtesy of SUBARU OF AMERICA, INC.
  16. Loosen the clamp which holds the right side fuel hose to injector pipe, and then remove the pipe from clamp.
    Fig 18: Loosening Clamp
    G03817863Courtesy of SUBARU OF AMERICA, INC.
  17. Remove the bolts which install the fuel pipe on intake manifold.
    Fig 19: Removing Bolts Of Fuel Pipe On Intake Manifold
    G03817864Courtesy of SUBARU OF AMERICA, INC.
  18. Remove the fuel pipe assembly and pressure regulator from the intake manifold.
  19. Remove the intake duct from the intake manifold.
    Fig 20: Removing Intake Duct From Intake Manifold
    G03817865Courtesy of SUBARU OF AMERICA, INC.
  20. Remove the tumble generator valve assembly from the intake manifold.
    Fig 21: Removing Tumble Generator Valve Assembly From Intake Manifold
    G03817866Courtesy of SUBARU OF AMERICA, INC.