LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - SOHC >> Ignition Coil And IGNITOR Assembly >> Inspection

Ignition Coil And IGNITOR Assembly: Inspection

Using a tester, inspect the following items. Replace if defective.

  1. Primary resistance
  2. Secondary coil resistance
    CAUTION: If the resistance is extremely low, this indicates the presence of a short-circuit.

    Specified resistance: 

    [Primary side] 

    1. Between terminal No. 2 and No. 4:  0.73 Ω10%
    2. Between terminal No. 1 and No. 2:  0.73 Ω10%
    Fig 1: Testing Ignition Coil Primary Resistance
    G02621834Courtesy of SUBARU OF AMERICA, INC.

    [Secondary side] 

    1. Between (A) and (B):  12.8 kΩ15%
    2. Between (C) and (D):  12.8 kΩ15%
    Fig 2: Testing Ignition Coil Secondary Resistance
    G02621835Courtesy of SUBARU OF AMERICA, INC.
  3. Insulation between primary terminal and case: 100 MΩ or more.